BOULDER 1160 STEREO POWER AMPLIFIER

BOULDER 1160  STEREO POWER AMPLIFIER
  • CONTINUOUS POWER; 8, 4, 2 OHMS

    300W

  • PEAK POWER, 8 OHMS

    300W

  • PEAK POWER, 4 OHMS

    600W

  • PEAK POWER, 2 OHMS

    1200W

  • THD, 8 OHMS, 300W

    20-2 kHz: 0.0009%, 20 kHz: 0.0048%

  • THD, 4 OHMS, 300W

    20-2 kHz: 0.0016%, 20 kHz: 0.0071%

  • THD, 2 OHMS, 300W

    20-2 kHz: 0.002%, 20 kHz: 0.0130%

  • EQUIVALENT INPUT NOISE (EIN), 20 KHZ, BW

    1.5 μV

  • MAGNITUDE RESPONSE, 20 HZ TO 20 KHZ

    +0.00, -0.04 dB

  • MAGNITUDE RESPONSE, -3 DB AT

    0.015 Hz, 150 kHz

  • VOLTAGE GAIN

    26 dB

  • SIGNAL TO NOISE RATIO (RE: 300W/8Ω)

    -127 dB, unweighted, 20 to 22 kHz

  • INPUT IMPEDANCE

    Balanced: 100k ohms,
    Unbalanced: 50k ohms

  • COMMON MODE REJECTION (BALANCED ONLY)

    60 Hz: 90 dB, 10 kHz: 70 dB

  • CROSSTALK, L TO R OR R TO L

    Greater than 120 dB

  • INPUT CONNECTORS

    3-pin balanced XLR

  • OUTPUT CONNECTORS

    Two sets of 6 mm / .250-inch wingscrews

  • WEIGHT

    Amplifier: 135 lbs. (61.2 kg)
    Shipping: 215 lbs. (97.5 kg)

  • POWER REQUIREMENTS

    100, 110-120, 220-240 VAC, 50-60 Hz

  • POWER CONSUMPTION

    15W standby, 240W nominal, 3600W at maximum output

  • Preis: CHF 32'800
  • Mehr Informationen gibt es auf der Herstellerseite: hier